Diamond Leather is a nano diamond coating that is specially formulated for leather surfaces. Creating a transparent protective layer, Diamond Leather will repel oil, grease and water for up to 12 months. Diamond Leather preserves the natural leather of your seats and panels leaving them breathable, supple and lustrous – and protected from UV and stains. Directions for Use: Treat the leather with Diamond Body Prep & dry with a microfiber towel. Shake Diamond Leather well for 15 seconds Apply 15 drops to an applicator. Apply on 1 surface of the leather seat in crosshatch fashion. Wait 1-3 mins and proceed to polish off excess with a microfiber towel. Wait 30 minutes for the coating to fully cure. Precautions Applicable only to smooth leather or leather-replacement surfaces (do not apply to suede or alcantara). Apply when air humidity does not exceed 70%. Apply in temperatures above 10C/50F degrees. Wear protective gloves. If accidentally applied to non-leather surfaces, clean up immediately as long exposure may cause staining. Avoid applying Diamond Leather to bright white leather in convertables as it can cause a greying effect. Application Tips Diamond Leather will absorb easily into the leather. Any excess which remains unabsorbed will haze. Buff the surface with a clean microfiber towel to remove excess product. Diamond Leather Installation Instructions
